How to Hack / Crack a WiFi Network In Windows ?

How to Hack / Crack a WiFi Network In Windows ?

Hi all users I think many Windows users here are struggling to hack WiFi networks because most of the tutorials are based on BackTrack and other Linux Tools . So today I'm here for sharing a method to Crack WiFi networks using WEP security protocol .The WEP is a very vuarable to attacks and can be cracked easily .

It takes about 5-6 hours if the password is weak a high signal of the WiFi network you are going to hack and you have sometimes 10-12 for more complicated passwords and if the WiFi signal of the Network is weak .The time taken also changes if the WiFi network you are going to hack has many other clients already accessing it . 

You will be using two tools :

1. Commview for WiFi : You will use this tool for capturing the packets sent and recieved through the Access Point you are going to hack .The more packets you capture the better chances of cracking the password .You will need more than 1,00,000 minium packets to crack the password .The packets will be captured in the .ncp format .You will use this tool to convert the .ncp to .cap .

Note :- Some WiFi cards are supported by Commview only in Windows 7 so i suggest you install Win 7 in your Virtual Machine if your card isn't supported .

2. Aircrack-Ng GUI : You will use this tool to crack the password of the Access Point using the . Cap files you obtained from the Commview application .

Note :- You need to run this as administrator .I have provided links for both the software below .

Download Links :

These are the links to the official website of the tools . Some Anti Viruses might detect Aircrack as a virus . It is a false positive .

1.Aircrack-NG GUI

Get it from HERE

2.Commview for Wifi

Get it from HERE

Now Get Ready to Crack :

Step 1 : Install CommView for WiFi . It doesnt matter whether you install it in VoIP mode or Standard mode . I used VoIP . It automatically installs the necessary drivers . Allow it to install .

Note :- You will not be able to connect to any Network using WiFi when using CommView .

Step 2 : Click on the PLAY ICON in the Left First .

Step 3 : (Choosing the Network (a) ) : A new window should pop up now. Click on the START SCANNING button .

Step 4 : (Choosing the Network (b) ) : Click on the WiFi network you want to hack in the Right Coulumn and Click on CAPTURE.

Note :- This tutorial is only for WEP protected networks .

Step 5 : (Capturing the Packets) : The windows should close now and you should see that CommView has started Capturing Packets .

Step 6 : (Saving the Packets ) : Now that the Packets are getting captured you need to Save them. Click on Settings->Options->Memory Usage Change Maximum Packets in buffer to 20000

Click on the LOGGING Tab .

Check AUTO-SAVING

In the Maximum Directory Size : 2000

Average Log File Size : 20

Now CommView will automatically Start Saving packets in the .ncp format at a size of 20MB each in the specified directory .

Step 7 : ( Concatenating the Logs ) : Since you are capturing a lot of logs you will need to concatenate them into once file . To do this go to Logging and click on CONCATENATE LOGS Choose all the files that have been saved in your specified folder and Concatenate them .

Now you will have one .ncf file .

Step 8 : (Converting .ncf to .cap ) : Now that you have one file with all the packets you need to Convert it into .cap file for AIRCRACK to crack .

Click on File->Log Viewer->Load Commview Logs-> Choose the .ncf file. Now File->Export->Wireshark/TCP dump format .

Aircrack Part :

Now for the Second Part Cracking this is very simple . Just open the Aircrack Folder->Bin->Aircrack-ng GUI.exe Choose the .cap file and you should be able to do the others 

Credit : m4dh4ck3r