Remove all restrictions from secured PDF files!

PDF files can be secured with restrictions that prevent you from { for example copying text from them or editing, printing, merging or splitting them. PDFUnlock! can remove these restrictions (a.k.a “owner password”).


If a password is required to open the uploaded file, you will be asked to enter it (a.k.a “user password”). PDFUnlock! cannot, however, recover lost or unknown user passwords.


Steps to unlock your PDF:

• Go to PDFUnlock
• Upload your PDF
• Click on Unlock!
• If it needs a password to open, enter it else it will be done automatically!
• Your’re done 

A PDF file can also be subject to non-standard encryption, such as DRM. PDFUnlock! does not remove such.

Improve System Performance With In a Minute

Improve your system performance using SysServer.  

OR

Whenever a program crashes or you experience a power outage, your computer may create errors on its hard disk (sometimes referred to as a hard drive). Over time, the errors can result in a slow PC. Fortunately, the Windows operating system includes several PC tools, including a Check Disk program, to identify and clean any errors on your computer and to help keep it running smoothly.

Show Your Name Next To Time On The Taskbar

Try this  trick to add up ur name in place of AM and PM beside time
Its simple
Step-1:- Navigate to -> Start -> Control Panel -> Regional and Language Option -> Click on Customize -> Go to TIME Tab -> Change AM symbol and PM symbol from AM and PM to ur name -> Apply -> Ok ...
Did It change? If not, follow step-2 below.





Step2:- Now go to time in task bar and Double Click it to open "Date and time property" ...Look place where time changes in digital form i.e. 02:47:52 AM , click to arrow to change the AM or PM by selecting and press arrow. It will Show ur name or name that was entered by u, Apply -> OK

MAC Spoofing by AnonyMac

1.Install Analogx AnonyMac in the both the systems.
2.Click on connection name and note the mac address of the system you want to set for the both.
3.On the other system,click on the connection name which you want to change mac address.
4.Go to modify MAC address and set to your manufacturer to the specified name which you noted before.
5.Do the same for the new MAC address menu,change it to specified address which you noted from your system before.
and press Apply New MAC address and you can restore to your old mac address anytime by using other option Restore original Mac address





Note:Mac address will be applied Only when system is restarted.
AnonyMac works on all versions of Windows, from Window 95 to Windows 7 and everything inbetween (including XP, Vista, Win2k, etc)

How To Speed Up Your Torrents Easily

Have you ever wondered why your direct downloading gives you more speed than your torrents? Do you want to know how to increase the downloading speed? The default settings of any torrent client will always gives you slow downloads because your client doesn’t know which type of connection you have. Every torrent client needs to be tweaked so as to increase the download speed. Today we will show you how to increase your torrent’s speed without using any any complex software, you’ll see the difference in downloading speed.

Here we are using utorrent v1.8 as an exemplary client with a 256k connection. We won’t waste more time, lets start changing the settings.

Connections Pane:

Change Your Network Settings
In Connections pane, Under “Port used for incoming connections”, enter any port number. It is best to use a port number above 10000. Mine is 17590 as shown in the pic.
Randomize Port Each Time Utorrent Start
This option randomizes the port each time utorrent starts, which is highly unnecessary, UNCHECK it.
Enable UPnP Port Mapping And NAT-PMP Port Mapping
If you are manually forwarding your port than keep it UNCHECKED, but if you dont know what port forwarding is or you’re not forwarding the port manually than CHECK it.
Add Utorrent To Windows Firewall Exceptions
UNCHECK it if your windows firewall is disabled, try disabling the Windows firewall whenever using torrents, because Windows firewall literally hates torrents, it won’t allow to increase the speed ever.

Bandwidth Pane:

Global Maximum Number of Connections
This option lets you “the number of connections made to your torrent”, it should not be set too low and not too high either, if you’ll set it too low, the torrent wont be able to connect with seeds and peers, if you set it too high it will cause too much bandwidth wastage. For 256K connection 130 is optimal. for other connections you can calculate it by this formula: upload speed x 80%
Maximum Number of connected peers per torrent
70 (for 256k) is optimal for other connections use this formula: upload speed * 1.3
Number of upload slots per torrent
Optimal setting for 256k connection is 3. To calculate your settings, try this formula: 1 + (upload speed / 6)
Use additional upload slots if upload speed <90%
it should be CHECKED.
Maximum Number Of Download Speed
It may sound interesting not to limit your download speed, but it greatly affects the downloading if set to unlimited. To calculate this setting use:
download speed * 90%

BitTorrent Pane:

Enable DHT Network
Its highly recommended to CHECK this option, it highly improves the speed.
Protocol Encryption
It is recommended to either select FORCED or ENABLE for this option, This can help increase speed in many ISPs.
Enable DHT for new torrents
CHECK it.
Enable Peer Exchange
CHECK it.
Ask Tracker For Scrape Information
CHECK it.
Enable Local Peer Discovery
CHECK it.
Limit Local Peer Bandwidth
UNCHECK it.

Advanced Pane:

Net.max_Halfopen
The default setting in Windows XP for maximum connections is 8 which is not optimal enough for torrents to connect to seeds and peers. The best way to increase the number of half open connections is to increase the value for 8 to 50 to 60, too high or too low will decrease the download speed drastically. We will have to apply a patch too to increase the default value (in Windows XP SP2 only), you can apply the patch from here, this patch will increase the half open connections on OS level.

NOTE: Windows update sometimes revert this setting back to default one, so its better to keep checking every now and then.

Peer.disconnect_inactive_interval
Increase the value from default 300 to 600, it also increases the download speed.

TCP Optimizer

Download this free software utility and apply the optimal settings, it will apply the most appropriate setting of your Internet connection. You can download this software from here.

Handling Firewall

If you use any firewall, Go to its Preference or Settings and find an option with tag ‘Allow list’ or ‘Programs’. Add utorrent or any client you’re using in allow list, save the settings when You’re done. In Windows firewall, you can add an exception of your torrent client too.

Port Forwarding

To learn how to forward ports manually, click here.

How To Configure Your Router

1. Go to start | run |type cmd, in command prompt type ipconfig, press enter.
2. Note down your ip address and default gateway.
3. Type in your default gateway into your browser’s address bar, a password prompt may come up. The default username and password are admin for some routers, if you use a username and password to connect try using that.
4. Under ‘Applications’ fill out one line for each p2p client you use
5. You need to use your ip address, the correct port range and set either tcp or udp
6. You can change the ports in the actual p2p client’s settings, just make sure they are the exactly same in the router too.
7. Save your settings.

I hope this article will help you to boost your torrents speed, if there is anything I missed, or you want to share some tips, don’t forget to leave a comment

How to send Anonymous Mail to anyone

Step 1:
First of all you need to register in free web hosting service which has PHP feature like this site:

www.x10hosting.com 

Step 2:
Now Download this zip file:
Mail.zip


Inside the file you can find the mail.php file. Extract the file

Step 3:
Now Go to x10hosting.com and login with your username and password.
Upload the "mail.php" file to "public_html" folder.

Step 4:
That's all you finished. 
Now go to this page

         yourhosturl/mail.php

Change the yourhosturl with your website url which you gave it when you register in x10hosting.com
For eg:
yourfavorites.x10.mx/mail.php

Usually the default will be "name.x10.mx"

When you visit you will see the form just like this:

Fill the form with your victim mail address and message subject and SEND


Or click here to send mail....:D

Are you selecting "Remember My Password"? Please read this

Remember Password I:
While login to your account in Mozilla,there will be option named as "remember password " .  If you selecting that option, soon you may loose your account. (if you are using in internet cafe,certainly you will loose).  Those password can be view by hackers which is stored in cookies(may be plain text or encrypted form).
  
Remember Password II:
After you click Login button mozilla will pop up with "remember password","never to this site","not now " option.  If you are selecting "remember Password" option, certainly you will loose your account. Because when you click that option,mozilla will store the password as plain text.  So it is not big deal to hack your account.  Hackers can see easily your password.


Do you want to know how to see those saved passwords? Then Read my article on

 Hack passwords in firefox browser

How to make your two friends call each other | you can listen the conversation

tep 1:
  Go to PrankDial site which is dedicated to such mobile hacks.

Step 2:
Now, you will get a form .  Fill the form with your friends phone no.XXXXXXXXXX

Step 3: 
Check "Record this conversation" and "I agree to the TOS". Hit on "Send the call" and your mobile hack will be completed.

click the Send call button

Nokia Secret codes

On the main screen type
*#06# for checking the IMEI (International Mobile Equipment Identity).
*#7780# reset to factory settings.
*#67705646# This will clear the LCD display (operator logo).
*#0000# To view software version.
*#2820# Bluetooth device address.
*#746025625# Sim clock allowed status.
*#62209526# - Display the MAC address of the WLAN adapter. This is available only in the newer devices that support WLAN
#pw+1234567890+1# Shows if sim have restrictions.
  
*#92702689# - takes you to a secret menu where you may find some of the information below:
1. Displays Serial Number.
2. Displays the Month and Year of Manufacture
3. Displays (if there) the date where the phone was purchased (MMYY)
4. Displays the date of the last repair - if found (0000)
5. Shows life timer of phone (time passes since last start) 

*#3370# - Enhanced Full Rate Codec (EFR) activation. Increase signal strength, better signal reception. It also help if u want to use GPRS and the service is not responding or too slow. Phone battery will drain faster though.
*#3370* - (EFR) deactivation. Phone will automatically restart. Increase battery life by 30% because phone receives less signal from network.
*#4720# - Half Rate Codec activation.
*#4720* - Half Rate Codec deactivation. The phone will automatically restart
 
If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.

Unlock service provider: Insert sim, turn phone on and press vol up-arrow keys) for 3 seconds, should say pin code. Press C, then press * message should flash, press * again and 04*pin*pin*pin#

*#7328748263373738# resets security code.
Default security code is 12345

*#1471# Last call (Only Vodafone)

*#21# Allows you to check the number that "All Calls" are diverted to

*#30# Lets you see the private number

*#43# Allows you to check the "Call Waiting" status of your phone.

*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to

*#67# Allows you to check the number that "On Busy Calls" are diverted to

*#67705646# Removes operator logo on 3310 & 3330

*#73# Reset phone timers and game scores

*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible


*#7780# Restore factory settings

*#8110# Software version for the nokia 8110

*#92702689# 

Displays - 1.Serial Number, 2.Date Made,
3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data

12345 This is the default security code

press and hold #
Lets you switch between lines

Cant access the blocked site? Use this Trick

This world wide web was invented to allow the sharing of files, books, audio and videos between people. Unfortunately schools, businesses, and even some entire governments don't allow public to have full access to the internet. They attempt to remove some websites, but because they only block some domain names, any connections you are able to make outside are able to pass on any domain website that the outside network can access. That's what this anonymous surfing for! You can use our services to view your favourite website and networks like myspace, youtube, facebook..

Here use this link and type the site which you want to access http://www.fastfreesurf.com/ 

Call to your Friend From their number itself

Steps to Follow:
1. Go to http://www.mobivox.com and register there for free account.

2. During registration, remember to insert Victim mobile number in "Phone number" field as shown below.

3. Complete registration and confirm your email id and then login to your account. Click on "Direct WebCall".

4. You will arrive at page shown below. In "Enter a number" box, select your country and also any mobile number(you can enter yours). Now, simply hit on "Call Now" button to call your friend with his own number.

5. That's it. Your friend will be shocked to see his own number calling him. I have spent last two days simply playing this cool mobile hack prank.

Increase Your Internet Speed By Using Net Cut

Administer your network based on ARP protocol using NetCut, a classic and user friendly software. It is a tool used on networks to cut down the network connection of victim. It can perform multiple tasks like listing IP-MAC table in seconds, turn the network on & off on any LAN computer or device like routers and switchers. Also in the latest version, you can also change the MAC address on any adapter.

With NetCut you can easily manage and track network events and protect users from ARP SPOOF based attacks with only one click! Also you can cut down any computer’s gateway network connection in no time using pure ARP protocol kernel enhanced cut off function keeping it trace free (nobody will be able to trace what happened). NetCut itself has an option to protect my computer. (It has option protect my PC . Simply select that checkbox)

Features :

1. Support windows 7 64 bit . The driver and Install package has been upgrade. tested working under windows 7 both 32 bit and 64 bit OS.
2. Support Clone MAC address from any PC that NetCut monitored.
3. NetCut can Turn off & on network on any device , computer/phone/xbox/wii/Router/switcher in your LAN.
4. Automatic latest Version detect.
5. NetCut can Find/export all MAC address in your network in seconds
6. Easy to use: One click to Protect user Computer Function!!! No one in the network can cut you off with ARP spoof technology anymore .
7. Effective: one Click to Cut down any computer s network connection to the gateway.
8. IYFT: Get all IP addresses of the computers in your LAN(Local Area Network) in Seconds
9. Netcut Works in office LAN, school LAN/ISP LAN or or even Iphone/Xbox/Wii/PS3andriod/andriod network.
10. Safe: TRACE Free, No one will TRACE out what happen.

 Download

Net Cut 2.1---- The most powerful netcut version (2.1.4) ever has been released. ensure 100% working under WI-FI. and ensure CUT OFF testing in all network environment.

Use Skype To Wake Up You With A Call For Free

Requirements:

A PC/Laptop
Windows (XP; not sure about others)
Internet ConnectionUS Home or Cell number

Step 1: Download and Install the latest version of download SKYPE

Step 2: Register and/or Login

Step 3: Open Start> Control Panel> Scheduled Tasks or Start> All Programs> Accessories> System Tools>Scheduled Tasks.

Step 4: Click on Add Scheduled Task

Step 5: The Wizard will open up, just click next.Note: it may take a long time loading the next window because it's making a list of all your programs

Step 6: Choose Skype in the long list (if it's not there, Browse:C:\Program Files\Skype\Phone\Skype.exe) and click next.

Step 7: Call it whatever you want, preferably relating to"Skype" or "Wake Up Call", Choose Daily, and click next.

Step 8: Start Time = Time you want the wake up call to call u. Choose everyday, weekday, or certain intervals, (you can fine tune these settings later) and click next.

You might be asked to enter an admin account and password to setup a task - Enter you info and hit 
next.

Step 9: Leave that stuff default and click next.
Step 10: Check the "Advanced Properties" box and click Finish.

Step 11: In the Run Box, at the end, add: /callto: phonenumber, ex: "callto:+18001111111". { note - there is no space between the : and phonenumber}

Note: Phone number is "+1"+area code+number. Such as: +1800555555

Step 12: Either click the Schedule tab to fine tune scheduling (MWF only, etc) or click Finish.

Step 13: Keep Skype logged in, and you're done!

To Test: Right click on the newly made task, and click "Run"

If you like to keep Skype up and running you will need to allow pass through calls.
Do this by opening skype --> go to : tools --> options--->advanced.Put a check mark in : Associate Skype with call to: links

Enjoy your free wake up call, keep in mind it will just ring, there will be no one on the other end. :D

Lock Your USB Pen Drive Easily

USB Flash drives are one of the easiest way to transfer data. But what happens when you lost your USB drive which has some important files which you don’t want to share. Or forget your USB on your office desk and worried about the data that you save on your USB pen drive. Data in a USB Flash Drive is protected by a password. All you need a free USB security app USB Flash Security, which allows you to protect the data inside your USB flash drive with a password.

Use of this app is so simple just download the app on your Windows PC and install the app. After the installation a new dialog box appears on your Windows screen asking you to connect the USB flash drive to the computer.

"USB Flash Security" makes the following two areas in USB Flash Drive:

1. Small area about 0.5MB to save "Release tool"
2. Area to save data that you want to protect

The application has both free and paid version and available for both 32-bit and 64-bit versions of Windows XP, Windows Vista, Windows 7 and Windows 8. All in all, USB Flash Security is a simple and effective solution to lock your USB Flash Drive.
Download USB Security